Aluminum Coating

In this article we will look at the important aspects to determine if your composition roof is going to last for many years to come or if it’s time to start planning for a new roof. This article is to give you a shallow understanding of what to look for. In many cases a professional in your area may need to be called. In Yakima, Washington roofing contractors may utilize different practices then in other parts of the country like, Las Vegas, NV. In Las Vegas, many roofing contractors believe that the underlayment is the roof system and will not install the roof as we would here in Yakima, WA.  Just as with inspecting a shake or wood shingle roof, the south facing decks that are exposed longer in the day to the sun will have the most damage. We always begin with the south facing decks, if they are failing then the rest of the roof won’t be far behind. To determine if the roof is failing, we need to look at the following: 1. Wall, Valley, Vent and pipe flashings. 2. Roofing shingles. 3. Roof fasteners. The first thing we will looks at are the flashings. Some roofing contractors will bid to use the cheapest materials possible to keep the price down and win your project. Check

In this article we will teach you how to inspect your shake roof to determine the remaining life. You will have the understanding and confidence to decide if your roof is in a failing state or if it has years of life remaining. To begin we start with a ground inspection. Ground Inspection From the ground we can often determine if the condition of a roof. It's very typical that by the time a customer deems their roof in bad enough shape to call us for an estimate of a new roof. In most cases the roof has been failing for years without them knowing. They haven't experienced any leaks that they know of, however the roof substrate has been suffering delamination for years. Once the roof is removed the rotting substrate must also be replaced in areas that leaked, adding cost that could have been avoided. From the ground we recommend doing a walk around of the whole building. A visual inspection of each roof deck to note the condition of the shakes or wood shingles. The south facing roof decks will typically face the sun the longest each and will be in worse shape then the other decks.

Inspectors

In this post we explore the claims and true cost of Roof Max. We also look at what Shingle manufacturers say about their products.

An ounce of prevention is worth a pound of cure. -Benjamin Franklin

Ice guard also known as Ice and water shield. This product is made from polymer-modified bitumen . It is produced in 3' wide rolls and depending on the manufacture and function will very in length. Ice Guard has a sticky back side covered by a protective cellophane that must be stripped off before applying the product.

The photo below will show you the basic principle of modern attic ventilation. The soffits have intake vents that pull's cool air into the attic that push's the hot air out the exhaust vents at the peak of the roof.

We're off to Find the Wizard!

Mastic